Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, SODIMM Memory

ValueRAM's KVR26S19S6/4 as a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin SODIMM uses gold contact fingers.

Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
8 internal banks; 2 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 1.18" (30.00mm)
RoHS Compliant and Halogen-Free


-Series
Kingston ValueRAM
-DDR Type
DDR4 SODIMM
-Size
1 x 4GB
-#Hide#Individual Module Size
4GB
-Speed
2666 MHz
-Compliance
PC4-21300
-Pins
260-pin
-CAS Latency
19-19-19
-Data Integrity Check
Non-ECC
-Voltage
1.2V
-Additional Information
See Overview
-Package Type
Retail
-Package Weight
0.0225 kg
-Warranty
Lifetime

Manufacturer
KINGSTON
More products by KINGSTON

Product Reference
740617280647