Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory

This document describes ValueRAM's KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.


- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 8 internal banks; 2 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23” (31.25mm)
- RoHS Compliant and Halogen-Free

-Series
Kingston ValueRAM
-DDR Type
DDR4
-Size
1 x 4GB
-#Hide#Individual Module Size
4GB
-#Hide#Total Capacity
4GB Total
-Speed
2666 MHz
-Compliance
PC4-21300
-Pins
288-pin
-CAS Latency
CL19
-Data Integrity Check
Non-ECC
-Voltage
1.2V
-Timings
19-19-19
-Heatsink
No
-#Hide#LED Lighting
No
-Additional Information
See Overview
-Package Type
Retail
-Package Weight
0.0225 kg
-Warranty
Lifetime

Manufacturer
KINGSTON
More products by KINGSTON

Product Reference
740617282733