Kingston 4GB, DDR3L, 1600MHz (PC3L-12800), CL11, SODIMM Memory *Low Voltage 1.35V*

KVR16LS11/4
4GB 1Rx8 512M x 64-Bit PC3L-12800 CL11 204-Pin SODIMM

ValueRAM's 512M x 64-bit (4GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low voltage, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This
204-pin SODIMM uses gold contact fingers.



Features

- JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
- VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
- 800MHz fCK for 1600Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 11, 10, 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 1.18” (30mm), double sided component

-Series
Kingston ValueRAM
-DDR Type
DDR3 SODIMM
-Size
1 x 4GB
-#Hide#Individual Module Size
4GB
-Speed
1600 MHz
-Compliance
PC3L-12800
-Pins
204-pin
-CAS Latency
CL11
-Data Integrity Check
Non-ECC
-Low Voltage
Yes
-Voltage
1.35V
-Additional Information
Unbuffered
-Package Type
Blister Pack
-Package Weight
0.0690 kg
-Warranty
Lifetime

Manufacturer
KINGSTON
More products by KINGSTON

Product Reference
740617219784