Click for a larger image
(images are for illustrative purposes only)
ValueRAM's KVR26S19D8/32 is a 4G x 64-bit (32GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers.
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Dual-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 1.18” (30.00mm)
RoHS Compliant and Halogen-Free
-Series
Kingston ValueRAM
-DDR Type
DDR4 SODIMM
-Size
1 x 32GB
-#Hide#Individual Module Size
32GB
-Speed
2666 MHz
-Compliance
PC4-21300
-Pins
260-pin
-CAS Latency
19-19-19
-Data Integrity Check
Non-ECC
-Voltage
1.2V
-Additional Information
See Overview
-Package Type
Retail
-Package Weight
0.0225 kg
-Warranty
Lifetime
Product Reference
740617304398
£76.80 Inc VAT
(£64.00 (Outside EU)ex VAT)