Antec Performance 1 FT Gaming Case w/ Glass Side Panels, E-ATX, 4 PWM Fans, CPU/GPU Temp Display, iUnity Monitoring Software, USB-C

Full Tower E-ATX Highly Compatible Gaming Case

CPU/GPU Temperature Display
Antec iUnity Software for instant data on PC specs
USB Type-C (10Gbps)
4mm Tempered Glass Side Panels
4x 30mm Thick Pre-Installed Storm T3 PWM Fans
Airflow-enhancing Mesh Front Panel
Supports RTX 40 Series Graphics Cards
Thoughtful Design Features
Modular Drive Trays
CPU/GPU Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.

Note: The Antec iUnity software must be installed.




Antec iUnity

The Antec iUnity Software provides instant data on PC specs, loads, and usage.
Download here


I/O Panel
Including the mainstream USB Type-C (10Gbps) port for high-speed transfer
Included dust plugs for dust prevention.
Mic/Audio 2-in-1 port



4mm Tempered Glass Side Panels

Both side panels adopt tempered glass for better PC showcase visual effects.



Cable Management On Point

2 cable covers are included for beautifying the cable management area.

There are ten sets of velcro straps for easy cable management:

- Three sets of velcro straps for fan & I/O cable routing
- Five velcro straps for hardware and power supply cables
- Two velcro straps at the rear for rear I/O cable routing.





30mm Thick Pre-Installed Storm T3 PWM Fans
3 x Storm T3 140mm PWM Fans at the Front
1 x Storm T3 120mm PWM Fan at the Rear
The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
The PWM function easily reaches the balance between cooling and silence.




Exquisite Steel Mesh

The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.




Best Airflow Path For GPU Cooling

Airflow-enhancing mesh front panel provides massive air.

Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling



Dust Filters
Top: Magnetic dust filter
Front: Magnetic & clip-on dust filter
Bottom: Full-sized pull-out dust filter.



Supports RTX 40 Series Graphics Cards

Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.





Thoughtful Design
Stud for Fixing
- The stud for fixing design provides a more convenient PC-DIY experience.
Back-Mounted PSU Bracket
- For easy installation.
Drop-Proof Bolt
- The drop-proof hook design avoids side panel damage.
Rubber Grommets
- 4 included rubber grommets for cable routing.
8 x Fully Open PCIe Slots
- Bridgeless design supports vertical GPU installation.
Rear Velcro Straps
- For the rear I/O cable routing.




Best Cooling Design
Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top most be less than 360mm)
Supports 360mm radiators at the front and top simultaneously
Up to 10 fans simultaneously




Modular Drive Trays
Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD





Case Compatibility - Extensive Interior
Motherboard support:
E-ATX(up to 285 mm), A TX, Micro-ATX, ITX
CPU cooler max height:
175 mm
GPU max length:
400 mm
Power Supply max length:
245 mm (with HDD) / 440 mm (without HDD)


-Form Factor
E-ATX
-#Hide#Small Form Factor
No
-Power Supply Wattage
No PSU
-Motherboard Support
E-ATX up to 285mm, ATX, Micro ATX, Mini ITX
-#Hide#Window(s)
Yes (Window)
-Connectors / Controls
1 x USB 10Gbps Type-C
2 x USB 3.0
Audio I/O
Temp. Display Switch
-Drive Bays
3 x 2.5"
2/2 x 3.5"/2.5" Drive Mounts
-Expansion Slots
8 Expansion Slots
-Cooling System
<strong>Included</strong>
Front: 3 x Storm T3 PWM 140mm fans
Rear: 1 x Storm T3 PWM 120mm fan

<strong>Fan Mounts</strong>
Front: 3 x 120 / 3 x 140 mm
Top: 3 x 120 / 3 x 140 mm
Rear: 1 x 120 mm
PSU Shroud: 3 x 120 mm
-.

<strong>Radiator Options:</strong>
Front: Up to 420 mm
Top: Up to 360 mm
Rear: 120 mm
-Colour
Black
-Material
Steel & Plastic
4mm Tempered Glass Side Panels
-Compatability
<strong>GPU max length:</strong>
400 mm

<strong> CPU cooler max height:</strong>
175 mm

<strong> PSU max length:</strong>
245 mm (with HDD)
440 mm (without HDD)
-Weight/Dimensions
12.55 kg
(DxWxH) 552 x 230 x 522 cm
-Additional Features
See Overview / Video
-Package Weight
14.8500 kg
-Warranty
2 Years

Manufacturer
ANTEC
More products by ANTEC

Product Reference
0761345100885